Factors to consider in the process of fiber optic cabling construction

1. Before performing fiber optic cabling, make sure to choose highly trained technicians to terminate and maintain the fiber. In addition, very complete design and construction drawings must be prepared for easy and reliable construction and future inspection.
2. Take care not to subject the fiber optic cable to heavy pressure during the wiring process, and place the cable carefully to avoid its abrasion and laceration by hard objects. In addition, the traction force should not exceed the maximum laying tension.
3, the length of one laying should not be too long (generally 2km, the wiring should be traction from the middle to both sides).
4, optical fiber in the process of laying, but also take into account the impact of the bend. The general fiber optic turn should be greater than 20 times the diameter of the fiber itself.
5、If the wiring needs to cross the wall and floor, be sure to add a protective plastic pipe with mouth guard to the fiber, and fill the pipe with flame retardant filler. A certain amount of plastic pipes can also be pre-layed in the building.
6, when the fiber optic application in the backbone network, each floor wiring room at least 6 core fiber optic cable, advanced applications as far as possible to use 12 core fiber optic cable. This is from the application, backup and expansion of the three aspects to consider.
7, the most important thing is to choose a suitable path for longer distance fiber laying. Here is not necessarily the shortest path is the most ideal, but also pay attention to the right to use the land, the possibility of erected or buried, etc.
8, in mountainous areas, high voltage grid area laying, pay attention to the reliable grounding of metal objects in the optical fiber, generally 3 grounding points per kilometer, or on the use of non-metallic optical fiber.
Fiber optic cabling is the general trend and has slowly become the dominant communication medium. In the near future, because fiber optics can be used without wiring compartments and active hardware, saving the cost of intermediate links, which can greatly reduce the total cost of spending, so it is also bound to achieve the application of fiber to the desktop.