1.Overview
1.1 FATC-YF288C-A01 is designed to seal without screws. The compact size and flip-over cover bring easy operation as well as complete function.
The splice trays are jointed with a hinge at one side, which makes the operation in each tray easier. It is designed to prevent from operation damage.
2.Specifications
Dimensions and Capability | |
Dimensions (H*W*D) | 395mm*245mm*130mm |
Weight | 5 KG |
Splitter Type | 12trays ,24fiber/tray |
Number of Cable Entrance/Exit | 2 input cable port for un-cut cable from diameter from10~17.5mm. 6 output cable ports for cable diameter from 8~17.5mm. |
Optional Accessories | Adapters, Pigtails, Heat Shrink Tubes, Micro Splitter |
Shipping Information | |
Package Contents | Fiber optics distribution box, 1 unit; Keys for lock, 2 keys; |
Package Dimensions(W*H*D) | 420mm*270mm*150mm |
Material | Carton box |
Weight | 6 KG |
Lead Time | 10-15 working days normally |
3.Structure and Technicial Features
3.1 Structure Features
3.1.1.Water-proof design with IP-68 Protection level.
3.1.2.Integrated with flap-up splice trays.
3.1.3.Impact test: IK10, Pull Force:100N, Full rugged design.
3.1.4.All stainless metal plate, anti-rust bolts and nuts.
3.1.5.Fiber bend radius control more than 40mm.
3.1.6.Full mechanical sealing mechanism.
3.1.7.Full rugged design for underground, pole/wall mounted.
3.1.8.1 mid-span cable entrance(10-16.5mm) for uncut cable and 6 mechanicals glands for distribution cable (8-16.5mm).
3.1.9.High density capacity max 288 cable splicing.
3.2 Technical Parameter
3.2.1.Connector attenuation（insert、interchange、repeat）≤0.3dB.
3.2.2.Return loss：APC≥60dB，UP≥50dB，PC≥40dB.
3.2.3.High - voltage protection grounding device:
3.2.4.Insulation resistance ：≥1000MΩ/500V（DC）.
3.2.5.Withstand voltage ：≥3000V（DC）/1min.
3.3 Main mechanical parameters
During maintenance ,clear marking of the optical path could avoid confusion effectively .
Connector plug durability ＞1000 times.
3.4 Working Environment
Working temperature： -40℃～＋60℃；
Store temperature ： －25℃～＋55℃
Relative humidity：≤85%（＋30℃）
Atmospheric pressure： 70～106kPa
4.Installation instructions
4.1Installation preparation
Checking the product : (1) Check the item number and accessories of fiber closure. (2) Check the fiber specification. (3) Check the parts quantity. (4) Check the instrument.
Documents Tools
1. Transverse cutting knife for cable outer security layer.
2. The longitudinal open cable knife.
3. Steel core cut clamp.
4. Cross screwdriver.
5. M6 hexagonal socket wrench.
6. Scissors.
7. Cutting clamp
4.2 Fiber-optical stripping and fix.
As per the requirement,open the hole-at the bottom of the box,then install the seal rings
As per the cable size to cut seal rings, cable through the it
Adjust the length of cable, keep extra cable around 0.5m；
Clean the cable, cut the cable protector around 0.4m,keep armoured part around 30mm,keep the fiber around 60mm；
When strip the cable ,use insulating tape or heat shrink protector；
Put the fiber through the hole,fix it with clamp, then tighten the screws.
4.3 Trunk optical cable splice and route with pigtail
Strip the fiber and pigtail, 1.3m to 1.5m, then put the tube protector；
Open the tray, splice the fiber；
Put the finished fiber into the tray ；
Fixed the fiber and pigtail；
Remark the fiber and record it
